- 圓角
- rounded: adj. 1.圓的；豐滿的，勻稱的。 2.(興趣)多樣的 ...
- angle: n. 〔古語〕釣鉤；釣具。 a brother of t ...
- angle rounded: 圓角
- radius of rounded angle: 圓角半徑
- rounded internal angle: 陰圓角
下載手機詞典可隨時隨地查詞查翻譯
rounded angle中文什么意思
- 圓角
下載手機詞典可隨時隨地查詞查翻譯
例句與用法
- The multiple - object optimum design for the round angle of the universal profiled roll based on the software ansys
軟件的萬能型鋼軋機機架圓角的多目標優化設計 - Simulation results show that better atomization can be realized by enhancing the cavitation intensity via increasing the injection pressure difference or decreasing the nozzle inlet round angle - radius ratio
通過模擬計算可知，提高噴射壓差和減小噴孔入口圓角半徑都可以提高空穴強度，同時也發現提高噴孔長徑比可以使空穴在噴孔出口截面上分布更為均勻。 - Based on this model , the effects of geometric and structural parameters , such as injection pressure , rear pressure , length - diameter ratio , inlet round angle - radius ratio and non - axis symmetry of nozzle , on the distribution of the cavitation inside the nozzle are analyzed
基于這一模型進一步分析了噴射壓力、背壓和噴孔長徑比、噴孔入口圓角比、非軸對稱噴孔等幾何結構參數對噴孔內空穴分布的影響。 - ( 6 ) in this paper . adopting fea software ansys to simulation and analysis the al ecap process . in order to spread out studying of ecap in the future . the results show : die comer angle , the radius of round angle , the friction coffience of workpiece and die , the properties of die ( elastic modulus , possion ratio ) et al , have some degree impact on the deformation of materials
( 6 )采用有限元( fea )分析軟件ansys對al的擠壓過程進行ecap仿真與分析，為后續研究工作做好鋪墊，分析結果表明：外切角、圓角半徑、試樣與凹模之間的摩擦系數、凹模本身的特性(如彈性模量、泊松比等)等等，對材料的變形量都由不同程度的影響。 - A concept of step - by - step round angle surface for transition and its mathematic modeling was put forward first time . different fiber placement patterns ( 0 , 90and 45 ply ) and their simulation module were designed . a simulation system for fp - - - - - - simjoint system for satellite triangle conjunction was composted , which include mandrel modeling , fiber placement trace in mandrel simulation and robot ' s kinematics simulation
詳盡描述了構架式衛星接頭的幾何建模過程，針對所研究對象的特點，提出了用于變截面曲面之間過渡的漸進圓角過渡曲面的概念，并建立了相應的數學模型；針對構架式衛星接頭設計了90 、 0和45等不同角度對應的纖維路徑和鋪絲線型仿真模塊。